6 Ways To Prevent Costly Heater Repair If you want to make sure that your heating system will be able to last for long and perform at optimal condition all the time, there are some ways that you need to take into consideration to make it happen including: Number 1. Regularly check the furnace filter every single month and change it if it is dirty. Doing this will not just help you to save on your utility bills but also, you can get better heating as well as air conditioning power. Number 2. Say for example that the heater comes on and off for short periods of time or odd times, you might as well want to adjust the HVAC unit to determine why it is turning off and on quickly or erratically. Normally, it only needs minor adjustments to the thermostat and that’ll do the trick. Also, you want to look at the humidifier on the furnace if it has burnt out solenoid water valve or clogged or perhaps, a bad drum motor which causes the unit to not work.
A 10-Point Plan for Professionals (Without Being Overwhelmed)
Number 3. Another crucial thing you have to do is checking the burner flame of the heating system. You will need to turn on the power switch and then after, activate the burners by increasing the temperature of your furnace. Say for example that the flames have a blue color, then you are doing just fine but if they’re yellow, then this may be a sign that the burners have to be cleaned.
The Best Advice About Experts I’ve Ever Written
Number 4. It is essential as well to remove the blower and give it a thorough cleaning by using a brush. Each blade has to be cleaned carefully while making sure that the counterweights are not disturbed. For the hot surface igniter, don’t dare to touch it. Instead, make use of a plastic straw and blow off the dirt that has accumulated in it. As a matter of fact, this approach will help you avoid getting burned while being able to prevent this fragile piece to be broken throughout the process. Number 5. Check for the bearing most especially if you have old system. You might have to add few drops of machine oil at least once per year to ensure that it is in good condition. Number 6. It is necessary for you to make adjustments in the event that your heating system works along with the AC unit. In most instances, the dampers are typically marked to where the air is directed. You can also adjust them in directing the warm air where you like it. Avoid costly heating repair bills by doing these simple maintenance tips.